Description
Universal Application: Achieve a stunning 95% spherical reflection mirror finish on any rigid or pliable material surface (e.g., metal, plastic, rubber, glass, ceramics, wood, leather, concrete).
Authentic Look & Feel: Boasts a flawless, shining chrome finish that feels just like genuine metal plating.
Extreme Durability: Provides excellent resistance to abrasion, corrosion, UV light, temperature fluctuations, and severe soiling phenomena.
Superior Alternative: A viable spray-on alternative to conventional electro chrome plating, PVD (Physical Vapor Deposition), and UV Photo-polymerization technologies. It meets the highest technical and decorative standards and performance requirements.
Simple & Cost-Effective: Unlike traditional metal plating, TuttoChromaMe™ is very simple to apply and does not require an investment in costly coating equipment.
Instant Dry & Custom Color: This HLPV airless spray paint dries immediately and is protected by a transparent top coat that can be colored to achieve any decorative or creative effect.
Characteristics
| Code | TUTTOCHROMAME SELENITE TC15 | Unit Qty | Mix Ratio | COVER sqm/l |
| TUT.PRI. IC100B | TUTTOPRIMER IC100B – Black | 1 kg | 8-10 | |
| TUT.CAT. IC80 | TUTTOCATALYST IC80 | 0,8 kg | 80% | |
| TUT.SEL.TC20 | TUTTOCHROMAME SELENITE TC15 | 1 L | ||
| TUT.TOP.MT300 | CLEARTOP MT300 (Glossy finish) | 1 kg | ||
| TUT.CAT. MT934 | CLEARCATALYST MT934 | 0,4 kg | 40% |
TUTTOCHROMAME™ SELENITE TC15 Application Guide
Achieve a captivating “Desert Rose” crystal effect by following these precise steps:
1. Surface Preparation:
- Smooth Perfection: To maximize smoothness and flatness, carefully sand and level pitted surfaces using medium to coarse grit sandpaper (400-600).
- Clean Thoroughly: Remove any contamination with SCUDOPICKLING 100AB solvent cleaner, especially for metal surfaces.
2. Primer Application:
- Mix it Right: Combine TUTTOPRIMER IC100B (100 parts) with TUTTOCATALYST IC80 (80 parts) at a 5:4 mix ratio.
- Spray Evenly: Apply using an HVLP spray gun (or standard spray gun) with a 2-1.3 mm nozzle at a nozzle pressure of 1.50 bar (21.75 psi).
- Shake Well First: Ensure both components are thoroughly mixed before use.
- Dry with Care:
- Oven Cure: Bake at 60°-70°C for 70 minutes, then let it cool and rest for 30 minutes.
- Air Dry: Alternatively, allow to dry at ambient temperature (20-25°C) for 12-24 hours.
- Keep it Clean: Ensure drying occurs in a clean, dust-free environment. Avoid touching the coated surface during drying.
3. Chrome Application (Selenite TC15):
- Shake Vigorously: Thoroughly shake the 1K TUTTOCHROMAME SELENITE TC15 well before pouring it into your HVLP spray gun.
- Spray with Precision: Use a 1-1.2/1.3 mm nozzle at a nozzle pressure of 50 bar (21.75 psi).
- Coat in Layers: Apply three even layers of TUTTOCHROME using overlapping, cross strokes until the surface is completely covered. A good technique is spraying from bottom to top, then across from left to right.
- Dry for Optimal Finish:
- Oven Cure: Bake at 60°-70°C for 70 minutes.
- Air Dry (Optimal): For the best results, allow to dry at ambient temperature for a full 24 hours. The longer the solvents evaporate, the higher the reflectivity (up to 90%-95% spherical reflectivity).
4. Top Coat Step:
- Mix the Clear Coat: Combine CLEARTOP MT300 (100 parts) with CLEARCATALYST MT934 (40 parts) at a 5:2 mix ratio using an HVLP spray gun (or standard spray gun) with a 2-1.3 mm nozzle at a nozzle pressure of 1.50 bar (21.75 psi).
- For Colored Finishes: If you desire a specific color, add CME Pigments to the mixed CLEARTOP MT300 and CLEARCATALYST MT934 according to the exact mixing percentages indicated on each CME Pigment bottle label.
- First Coat Drying: Let the first coat dry at 60°-70°C for 1 hour or at room temperature for 12-24 hours. After 3 hours, the product can be handled and packaged.
- Second Coat for Durability & Gloss: Always apply a second layer of the mixed CLEARTOP MT300 and CLEARCATALYST MT934 after any color coating. This ensures a high-quality, glossy, and long-lasting finish.
- For a Matte Finish: Instead of CLEARTOP MT300 and CATALYST MT934, use CLEARTOP MT800 (Matte finish) and SCUDO 8 SC Anti-fouling according to their specific mixing instructions.
TuttoChromaMe™ TCseries: The Ultimate Mirror Coating System
● Universal Mirror Finish: Get a stunning 95% spherical reflection mirror finish on any rigid or flexible material.
● Authentic Look & Feel: Delivers a flawless, shining chrome that feels just like real metal plating.
● Extreme Durability: Offers excellent resistance to abrasion, corrosion, UV light, temperature changes, and severe soiling.
● Superior Alternative: A viable spray-on solution to expensive electroplating, PVD, and UV Photo-polymerization tech. It meets the highest technical and decorative standards.
● Cost-effective & straightforward: Incredibly easy to apply, requiring no investment in costly coating equipment.
● Instant Dry & Custom Color: Our HLPV airless spray dries immediately. It is protected with a transparent top coat that can be colored for any creative effect.
