TUTTOCHROMAME RAINBOW TC10 Multicolor irridiscent effect

$1,368.36

TuttoChromameTM Rainbow TC10 is an iridescent holographic spray nano coat. The transparent and shiny finish enhances the shades of colors—the prismatic color on the surface changes from different viewing angles.

Description

TuttoChromaMe™ TCseries: The Ultimate Mirror Coating System

  • Universal Application: Achieve a stunning 95% reflective mirror chrome on virtually any surface – rigid or flexible.
  • Authentic Look & Feel: Delivers a flawless shine that feels just like genuine metal plating.
  • Extreme Durability: Boasts excellent resistance to abrasion, corrosion, UV light, temperature, and severe soiling.
  • Superior Alternative: A highly viable spray-on alternative to costly and complex electro chrome plating, PVD, and UV Photo-polymerization.
  • Cost-effective & straightforward: Incredibly easy to apply, requiring no investment in expensive coating equipment.
  • Instant Dry & Custom Color: HLPV airless spray dries immediately and is protected by a transparent top coat that can be colorable for any decorative effect.

 

Code TUTTOCHROMAME RAINBOW TC10 Multicolor iridescent effect Unit Qty Mix Ratio COVER sqm/l
TUT.PRI. IC100B TUTTOPRIMER IC100B – black 1 kg    

 

 

 

 

16-20

TUT.CAT. IC80 TUTTOCATALYST IC80 0,8 kg 80%
TUT.RBW.TC20 TUTTOCHROMAME RAINBOW TC10 1 L  
TUT.TOP.MT300 CLEARTOP MT300 (Glossy finish) 1 kg  
TUT.CAT. MT934 CLEARCATALYST MT934 0,4 kg 40%

 

TUTTOCHROMAME™ RAINBOW TC10 Application Guide

Achieve a flawless, iridescent finish by following these precise steps:

1. Surface Preparation

  • Smooth Perfection: For pitted areas, meticulously sand and level the surface using medium to coarse grit sandpaper (400-600). This crucial step maximizes smoothness and flatness for optimal results.
  • Contamination-Free: Thoroughly remove any contaminants using SCUDOPICKLING 100AB solvent cleaner, especially vital for metal surfaces.

2. Primer Application

  • Precise Mixing: Combine TUTTOPRIMER IC100B (100 parts) with TUTTOCATALYST IC80 (80 parts) at a 5:4 mix ratio. Remember to shake well before use.
  • Even Application: Apply using an HVLP spray gun (or standard spray gun) fitted with a 2-1.3 mm nozzle. Maintain a nozzle pressure of 1.50 bar (21.75 psi).
  • Critical Drying:
    • Accelerated Cure: Dry at 60°-70°C for 70 minutes, then allow a 30-minute rest.
    • Ambient Dry: Alternatively, let it cure at ambient temperature (20-25°C) for 12-24 hours.
  • Maintain Cleanliness: Ensure drying occurs in a clean, dust-free environment. Crucially, avoid touching coated surfaces during this stage.

3. Chrome Application (Rainbow TC10)

  • Prepare Your Product: Thoroughly shake the 1K TUTTOCHROMAME RAINBOW TC10 before pouring it into your HVLP spray gun.
  • Spray Technique: Use a 1-1.2/1.3 mm nozzle at a pressure of 50 bar (21.75 psi).
  • Layer for Coverage: Apply three even layers of TUTTOCHROME using crossed strokes to achieve complete surface coverage. We recommend spraying from bottom to top, then crossing from left to right.
  • Optimal Drying for Reflectivity:
    • Accelerated Dry: Dry at 60°-70°C for 70 minutes.
    • Maximum Reflectivity: For best results, allow to dry at ambient temperature for 24 hours. The longer solvents evaporate, the higher the spherical reflectivity (up to 90%-95%).

4. Top Coat Application

  • Clear Coat Mix: Combine CLEARTOP MT300 (100 parts) with CLEARCATALYST MT934 (40 parts) at a 5:2 mix ratio. Apply with an HVLP spray gun (or standard spray gun), using a 2-1.3 mm nozzle at a pressure of 1.50 bar (21.75 psi).
  • Custom Coloring (Optional): If a specific color is desired, add CME Pigments to the mixed CLEARTOP MT300 and CLEARCATALYST MT934. Refer to the bottle label for the precise mix ratio for each pigment.
  • Initial Drying & Handling: Let the first coat dry at 60°-70°C for 1 hour or at room temperature for 12-24 hours. After 3 hours, the product can typically be handled and packaged.
  • Ensure Durability & Gloss: Always apply a second layer of CLEARTOP MT300 (100%) + CLEARCATALYST MT934 (40%) after any color coating. This is critical for achieving a high-quality, glossy, and durable finish.
  • Matte Finish Option: For a matte aesthetic, use CLEARTOP MT800 (Matte finish) and SCUDO 8 SC Anti-fouling instead of CLEARTOP MT300 and CATALYST MT934. Consult their specific mixing instructions.

You may also like…