Description
Mirror Finish, Any Surface: Achieve a stunning 95% reflective mirror chrome on anything – rigid or flexible.
Real Metal Look & Feel: Flawless shine with the authentic touch of metal plating.
Built to Endure: Exceptional resistance to scratches, corrosion, UV, heat, and tough grime.
Smarter Than Traditional Plating: Easy spray-on alternative to expensive electroplating, PVD, and UV tech.
No Costly Equipment Needed: Simple HLPV airless spray application saves you money.
Fast Drying, Limitless Color: Dries instantly and can be tinted for any decorative effect with a protective top coat.
Characteristics
| Code | TUTTOCHROMAME KIT NERO TC5 Black Chrome | Unit Qty | Mix Ratio | COVER sqm/l |
| TUT.PRI. IC100B | TUTTOPRIMER IC100B – Black | 1 kg | 8-10 | |
| TUT.CAT. IC80 | TUTTOCATALYST IC80 | 0,8 kg | 80% | |
| TUT.NER.TC20 | TUTTOCHROMAME KIT NERO TC5 Black Chrome | 1 L | ||
| TUT.TOP.MT300 | CLEARTOP MT300 (Glossy finish) | 1 kg | ||
| TUT.CAT. MT934 | CLEARCATALYST MT934 | 0,4 kg | 40% |
TUTTOCHROMAME™ NERO TC5 Application Guide
Follow these steps for a flawless, deep black chrome finish:
- Surface Preparation:
- Smooth It Out: For pitted surfaces, carefully sand and level using medium to coarse grit sandpaper (400-600) to maximize smoothness and flatness.
- Clean Thoroughly: Remove any contamination with SCUDOPICKLING 100AB solvent cleaner, especially for metal surfaces.
- Primer Application:
- Mix it Right: Combine TUTTOPRIMER IC100B (100 parts) with TUTTOCATALYST IC80 (80 parts) at a 5:4 mix ratio.
- Spray Evenly: Apply using an HVLP spray gun (or standard spray gun) with a 1.2-1.3 mm nozzle at a pressure of 1.50 bar (21.75 psi).
- Shake Well First: Ensure both components are thoroughly mixed before use.
- Dry with Care:
- Oven Cure: Bake at 60°-70°C for 70 minutes, then let it cool and rest for 30 minutes.
- Air Dry: Allow to dry at ambient temperature (20-25°C) for 12-24 hours.
- Keep it Clean: Ensure drying occurs in a clean, dust-free environment. Avoid touching the coated surface during drying.
- Chrome Application (NERO TC5):
- Shake Vigorously: Thoroughly shake the 1K TUTTOCHROMAME Nero TC5 well before pouring it into your HVLP spray gun.
- Spray with Precision: Use a 1-1.2/1.3 mm nozzle at a pressure of 1.50 bar (21.75 psi).
- Coat in Layers: Apply three even layers of TUTTOCHROME using overlapping, cross strokes to ensure complete coverage. A good technique is spraying from bottom to top, then across from left to right.
- Dry for Optimal Finish:
- Oven Cure: Bake at 60°-70°C for 70 minutes.
- Air Dry (Optimal): For the best results, allow to dry at ambient temperature for 24 hours. The longer the solvents evaporate, the higher the reflectivity (up to 90%-95% spherical reflectivity).
- Top Coat Step:
- Mix the Clear Coat: Combine CLEARTOP MT300 (100 parts) with CLEARCATALYST MT934 (40 parts) at a 5:2 mix ratio using an HVLP spray gun (or standard spray gun) with a 1.2-1.3 mm nozzle at a pressure of 1.50 bar (21.75 psi).
- For Colored Finishes: If you desire a specific color, add CME Pigments to the mixed CLEARTOP MT300 and CLEARCATALYST MT934 according to the exact mixing percentages indicated on each CME Pigment bottle label.
- First Coat Drying: Let the first coat dry at 60°-70°C for 1 hour or at room temperature for 12-24 hours. After 3 hours, the coated item can be handled and packaged.
- Second Coat for Durability & Gloss: Always apply a second layer of the mixed CLEARTOP MT300 and CLEARCATALYST MT934 after any color coating. This ensures a high-quality, glossy, and long-lasting finish.
- For a Matte Finish: Instead of CLEARTOP MT300 and CATALYST MT934, use CLEARTOP MT800 (Matte finish) and SCUDO 8 SC Anti-fouling according to their specific mixing instructions.
