1. Prep Your Surface
- Smooth It Out: For pitted areas, meticulously sand and level using medium to coarse grit sandpaper (400-600) to ensure maximum smoothness and flatness.
- Clean Thoroughly: Eliminate all contamination, especially on metal, with SCUDOPICKLING 100AB solvent cleaner.
2. Apply the Primer
- Mix it Right: Combine TUTTOPRIMER IC100B (100 parts) with TUTTOCATALYST IC80 (80 parts) at a 5:4 mix ratio.
- Spray Evenly: Apply using an HVLP spray gun (or standard spray gun) with a 1.2-1.3 mm nozzle at a pressure of 1.50 bar (21.75 psi).
- Shake Well First: Ensure both components are thoroughly mixed before use.
- Dry with Care:
- Oven Cure: Bake at 60°-70°C for 70 minutes, then let it cool and rest for 30 minutes.
- Air Dry: Allow to dry at ambient temperature (20-25°C) for 12-24 hours.
- Keep it Clean: Ensure drying occurs in a clean, dust-free environment. Avoid touching the coated surface during drying.
3. Chrome Application
- Shake Vigorously: Thoroughly shake the 1K TUTTOCHROMAME STD TC20 before pouring it into your HVLP spray gun.
- Spray with Precision: Use a 1-1.2/1.3 mm nozzle at a pressure of 1.50 bar (21.75 psi).
- Coat in Layers: Apply three even layers of TUTTOCHROME using overlapping, cross strokes to ensure complete coverage. A good technique is spraying bottom to top, then across from left to right.
- Dry for Maximum Shine:
- Oven Cure: Bake at 60°-70°C for 70 minutes.
- Air Dry (Optimal): For the best results and highest reflectivity (up to 90%-95%), allow to dry at ambient temperature for a full 24 hours. The longer the solvents evaporate, the better the mirror finish.
4. Apply Top Coat
- Mix the Clear Coat: Combine CLEARTOP MT300 (100 parts) with CLEARCATALYST MT934 (40 parts) at a 5:2 mix ratio using an HVLP spray gun (or standard spray gun) with a 1.2-1.3 mm nozzle at a pressure of 1.50 bar (21.75 psi).
- For Colored Finishes: If you desire a specific color, add CME Pigments to the mixed CLEARTOP MT300 and CLEARCATALYST MT934 according to the exact mixing percentages indicated on each CME Pigment bottle label.
- First Coat Drying: Let the first coat dry at 60°-70°C for 1 hour or at room temperature for 12-24 hours. After 3 hours, the coated item can be handled and packaged.
- Second Coat for Durability & Gloss: Always apply a second layer of the mixed CLEARTOP MT300 and CLEARCATALYST MT934 after any color coating. This ensures a high-quality, glossy, and long-lasting finish.
- For a Matte Finish: Instead of CLEARTOP MT300 and CATALYST MT934, use CLEARTOP MT800 (Matte finish) and SCUDO 8 SC Anti-fouling according to their specific mixing instructions.
1. Surface Preparation
- Decontaminate Thoroughly: Start by eliminating any contamination that could compromise adhesion.
- Plastic-Specific Cleaning: If you’re working with plastic, we strongly advise a thorough cleaning with our specialized solvent, SCUDOPICKLING 52MT.
- Flawless Base: For optimal results, apply directly to a meticulously prepared surface—one that’s been sanded to a perfectly flat, fine, uniform finish, ensuring it’s impeccably clean and dry.
2. CATALYSER (Hardner)
- Two-Part System: Please note that
- Single Coat Yield: One tin of SCUDOCHROMAME 602FX will cover approximately 5 to 6 square meters in a single coat.
- Optimal Application: For best results, we recommend applying two coats, which yields an average coverage of 2 to 3 square meters, depending on surface condition and application method.
- is a two-component (2K) product, requiring precise mixing.
- Exact Ratio: Catalyze by mixing SCUDOCHROMAME 602FX (100%) with SCUDOCATALYST 52MT (40%) – a strict 5:2 ratio.
- Mix Thoroughly: Shake well before use to ensure a uniform and effective blend.
3. APPLICATION METHODS
- Versatile Application: Apply using a brush, roller, or HVLP Airless spray gun. Please note: Spray gun application is for PROFESSIONAL USE ONLY.
- Layering Technique: Allow a 5-10 minute interval between each coat for proper layering.
- Spray Gun Specifications:
- Nozzle Tip: 1.3-1.5 mm
- Minimum Nozzle Pressure: 300 bar (4351 psi)
4. Optimal Environment
- Controlled Conditions: For best results, this product must be applied in a clean, temperature- and humidity-controlled environment.
- Recommended Parameters:
- Temperature: 20-25°C (68-77°F)
- Relative Humidity: 30-60%
5. Coverage
- Single Coat Yield: One tin of SCUDOCHROMAME 602FX will cover approximately 5 to 6 square meters in a single coat.
- Optimal Application: For best results, we recommend applying two coats, which yields an average coverage of 2 to 3 square meters, depending on surface condition and application method.
6. DRYING & CURING TIME
- Controlled Conditions: Drying and curing times are determined under controlled temperatures and relative humidity (below 85%), based on the average dry film thickness (DFT) range.
- Pot Life: The pot life after catalyzer mixing is a maximum of 2 hours.
- Application Temperature Limits:
- Minimum: 10°C
- Maximum: 40°C
- Layer Application: Allow the product to cure thoroughly before applying subsequent layers.
- Environmental Exposure: The product must be perfectly dry before exposure to fog, rain, or frost.
7. STORAGE INSTRUCTIONS
- Packaging: Available in convenient 1 kg, 5 kg, and 20 kg tin cans.
- Shelf Life:
- Storage Temperature: Keep between a minimum of 3°C and a maximum of 40°C.
- Always keep away from direct sunlight.
- Product Stability (in original package):
- SCUDOCHROMAME 602FX: 5 years
- SCUDOCATALYST 52MT: 3 years
- Safety First: Always read the Material Safety Data Sheet (MSDS) carefully before using these products.
1. Surface Preparation
- Decontaminate Thoroughly: Eliminate any contamination that could interfere with adhesion using a solvent cleaner like MEK (Methyl Ethyl Ketone) / alcohol.
- Achieve Flawless Smoothness: For pitted surfaces, carefully sand and level using medium to coarse grit paper (400-600) to maximize smoothness and flatness.
- Mask Precisely: Mask any areas not to be chromed using non-absorbing paper or tape.
2. PRIMER
- Precise Mixing & Application: Uniformly apply the catalyzed primer. Mix PRIMER IC100B (100%) with TUTTOCATALYST IC80 (80%). Shake well before applying with an HVLP spray gun.
- Critical Drying & Curing:
- Accelerated Cure: Let dry at 60°-70°C for 70 minutes.
- Optimal Results: For superior results, allow parts to rest at ambient temperature for 12 hours.
- Maintain Pristine Conditions: Ensure curing occurs in a clean, dust-free environment. Never touch the coated surfaces. The primer layer must be perfectly plain and glossy.
3. CHROME
- Prepare Your Product: Shake TUTTOCHROMAME STD TC20 vigorously before pouring it into your HVLP spray gun.
- Spray Settings: Use a 1-1.2/1.3 mm nozzle at 1 bar (14.5 psi) pressure for a reduced product flow.
- Layer for Brilliance: Apply 3 layers with crossed strokes until the surface is completely covered. We recommend spraying from bottom to top.
- Maximize Reflectivity:
- Initial Dry: Let dry at 60°-70°C for 70 minutes.
- Optimal Shine: For the highest reflectivity (up to 95%-98% spherical), allow to dry at ambient temperature for 24 hours. The longer solvents evaporate, the more brilliant the finish.
4. TOP COAT
- Mix & Apply Clear Coat: Apply CERAMIC TOP COAT CLEARTOP MT300 (100%) + CATALYST MT439 (50%) using a standard spray gun.
- Custom Coloring (Optional): If special coloring is desired, add CME Pigments to the mixed CERAMIC TOP COAT CLEARTOP MT300 and CATALYST MT439. Follow the precise mix ratio % specified for each pigment on its bottle label.
- Drying & Handling:
- Let dry at 60°-70°C for 1.5 hours.
- The product can be handled and packaged/wrapped after 3 hours.
- For Superior Finish & Durability: It is highly advisable to always apply a second layer of the mixed CERAMIC TOP COAT CLEARTOP MT300 and CATALYST MT439 after any color coating, ensuring a high-quality, glossy, and durable finish.
VIDEOS
Do you have any questions? Contact us
Leave a request and we will contact you shortly
FAQ
The process of applying the products may seem easy, but it’s crucial to strictly adhere to the specified procedures and follow the recommended operating parameters. To ensure proper application, scan the QR code on the product label for access to the Application Data Sheet and instructional videos. Qualified customers have 24/7 online access to training and application information, and support is available by calling Mobile & WhatsApp
We’re committed to your success with ChromaMe®! Here’s how our comprehensive support works:
- Pre-Sales Demos: Before you even commit, you’re invited to our ChromaMe® Air and Surface Nano Tech Demonstration Labs in Charleston, SC. Here, you can attend a free sampling and demonstration session to see the product in action.
- Post-Sales Training: Once you’re a customer, your technical staff can attend an intensive 3-day Special Starter Course at our Demo Labs. This hands-on training covers:
- Direct, on-the-job instruction for product use.
- Insights into various possible applications.
- Guidance on how to avoid product misuse. You’ll even get to perform starter applications on our samples, guided by our technicians, so you can confidently repeat them back at your facility.
- Certification: We offer official certifications in the United States for all clients who complete our training.
- 24/7 Support: Beyond training, you’ll have 24/7 online access to training materials and application information. Plus, our support team is always available via Mobile & WhatsApp.
You’ll be pleased to know that using ChromaMe® products requires standard painting equipment commonly found in a typical paint booth setup. This includes:
- A compressor
- A spray gun
- And a clean room for storing your freshly coated items.
While not strictly essential, we highly recommend having an oven or infrared system. These tools are handy for significantly speeding up the drying and curing process, enabling you to achieve optimal results and complete projects more quickly.
The equipment required depends on the specific product you choose:
- For ExtraChromaMe® (100% reflectivity): Achieving this ultimate reflectivity requires our special, compact Application Machine equipped with its unique, proprietary design spray gun. This system is a complete, professional mobile paint workstation.
- For TuttoChromaMe™ (95% reflectivity): You’ll be pleased to know that TuttoChromaMe™ is applied with conventional spray guns. It does not require any special equipment beyond a standard, conventional dry spray booth.
No, ChromaMe® Air and Surface Nano Tech products are not a new chroming process in themselves. Instead, they represent groundbreaking new solutions for conventional chrome spray painting.
Our advanced nanocoatings allow you to achieve a stunning chrome mirror-like effect on virtually any surface and material with unprecedented quality in terms of both durability and reflectivity. It’s about enhancing and perfecting existing spray chrome techniques with superior materials.
Absolutely, yes! Our products are engineered for exceptional resilience.
ScudoChromaMe is a transparent, anti-fouling top coating specifically designed to be applied over all ChromaMe® Air and Surface Nano Tech Chrome paints. It provides a very significant increase in surface hardness, offering robust protection.
Our rigorous testing demonstrates:
- Superior Corrosion Protection: Proven resistance against solvents like MEK (Methyl Ethyl Ketone).
- Enhanced Durability: Outstanding abrasion and scratch resistance.
- Long-Lasting Brilliance: Excellent UV light resistance, ensuring PlataChromaMe reflectivity remains close to an astonishing 98%.
Furthermore, ScudoChromaMe has been successfully proven as a permanent anti-fouling solution for boat hulls, offering unparalleled protection against marine growth.
Yes! All-Chrome LLC is proud to be the exclusive distributor of ChromaMe® Air and Surface Nano Tech products in the United States.
ChromaMe® Air and Surface Nano Tech is the original manufacturer. This Italian Nano-Material Engineering company produces and distributes cutting-edge products related to nanotechnology and materials, all of which are protected by patents and proprietary intellectual property. We bring their innovative solutions directly to you across the U.S.
Absolutely, yes! Not only can you integrate it, but doing so will significantly enhance your current business capabilities.
By adopting the ChromaMe® system, you’ll immediately begin tapping into exciting new market opportunities that were previously unimaginable. This includes highly technological industrial applications, as well as innovative exterior and interior design projects within the construction industry. Expand your horizons and revolutionize your offerings!